86-0769-81908761
News
Hot Product
Splitter
Hot nozzle
CONTACT US
TEL86-0769-81908761
E-mailhongsutop@163.com
AddressPeasant Industrial Zone, Tianwei, Fenggang Town, Dongguan City, Guangdong Province
News HOME >> News
Thermostat (Thermostat), according to the temperature change of the working environment, physical deformation inside the switch, resulting in some special effects, a series of automatic control components to turn on or off, or electronic components at...
In the process of injection molding, we often encounter the brittleness of injection molded products. How does this happen? What are the reasons? Hongsheng Mould will tell you:1. The plasticizing capacity of the machine is too small, the plastic is not...
On-off operation of hot runner system(1) PreparationThe molder connects the movable mold, the fixed mold and the hot mold half cooling water path of the mold. If the mold temperature requirements of the movable mold and the fixed mold are different, a separate...
1. Guarantee normal office loadThe volume and property of office load of construction machinery have an important influence on the damage process of qualitative machinery. Generally speaking, the wear of parts increases proportionally with the increase of load...
Mold advantagesHot runner molds are widely used in various industrialized countries and regions in the world today. This is mainly because the hot runner mold has the following remarkable features:1. Shorten the molding cycleDue to the limitation of the...
The hot runner system is a relatively complex technology in the field of injection molding. There are many issues that need to be considered when mold design manufacturers and mold users choose and purchase hot runner systems.A hot runner supplier's choiceWhen...
The valve hot runner is a hot runner system that is widely used by major international hot runner suppliers. This system opens or closes the gate by mechanical movement at a predetermined time by the use of a valve needle under the action of the needle control...
Composition editorAlthough there are many hot runner manufacturers and a variety of hot runner products in the world, a typical hot runner system consists of the following major components:1. Main splitter (MANIFOLD)2. Nozzle (NOZZLE)3. Temperature Controller4...
Core Tip: For small injections of injectables, indirect gates are more suitable than direct gates, especially for fiberglass reinforced plastics. The amount of material that is sprayed through the #x5634; is gradually increased, thus producing more heat in the...
简体中文
English
HOT KEY： 
